Blogs » Business » booster-ex2 weldy plastic extrusion welder fault inspection pro

booster-ex2 weldy plastic extrusion welder fault inspection pro

• Posted by tangram tangram September 28, 2022 - Filed in Business - 270 views

  The service life of booster-ex2 weldy plastic extrusion welder is more than 20 years. Most of the failures are caused by the mobile welder, which is caused by improper operation. So how to check the problem? Proceed as follows:

  1. Check whether the parts are loose

  2. Check whether the sliding bearing or guide rail is smooth

  3. Is the water cooling system normal?

  4. Whether the bare wires and inner conductors and their wiring are firm

  5. Whether the power switch device turns on and off all non-grounded power lines, and whether the on-off of the line is clearly displayed

  6. Whether the insulation resistance meets ≥200mΩ

  7. Whether the no-load voltage and current are normal, and there are normal values on the nameplate

  8. Whether the pressure of the compressed air system is normal and whether there is air leakage.

  9. Does the controller alarm?

  10. Whether the electrode is worn too much.

  booster-ex2 weldy plastic extrusion welder https://www.dowelding.com/Booster-EX2-Weldy-plastic-extrusion-welder.html